Jasper D'Ambrosi and the Bronze at Home

The bronze on the sideboard
You might have brought it home from a trip years ago, or you could be standing in front of it right now, trying to decide. Take Papa’s Chihuahua, a bronze that Broadmoor Galleries lists from the Jasper D’Ambrosi estate. It is small, 18 by 7 by 7.5 inches, and the gallery has it as Sold Reserved at $2,500. That size lets it sit on a sideboard or deep windowsill without demanding a pedestal. The piece is edition 23 of 50, and it shows the kind of work that comes from someone who was a sculptor, painter, and printmaker but whose greatest strength was in his bronze sculpture. He found the medium exciting and challenging, and it seemed especially suited to his talents. Before you commit, walk around it once and notice how the light catches the metal.
A designer who kept sculpting
Before the bronze foundry became the center of his life, Jasper D’Ambrosi spent years at a drafting table. After graduating cum laude from the University of Southern California, where he studied painting on a football scholarship, he went to work in the art department of Douglas Aircraft and stayed nine years. He later headed the graphic arts department there, according to Broadmoor Galleries, and then founded his own printing and design business. That company specialized in custom silk screen printing, graphics designs, and decorator products. Through all of it he never abandoned painting, drawing, and sculpting, and he built a reputation in group and one-man shows around southern California, picking up awards at juried competitions held by the Los Angeles County Museum of Art and the National Orange Show. In 1970 he sold the design business and turned to fine art full time. Broadmoor lists his birth year as 1926, though the Wikipedia article notes that the year of his birth is missing.
El Capitan in Dodge City
If your travels ever took you through Dodge City, you may already know the longhorn. El Capitan stands at 2nd and W. Wyatt Earp, a life-sized bronze by Jasper D’Ambrosi that commemorates the cattle drive days of 1875 to 1886. The Kansas guidebook notes he is standing once again, though a Streetscape Project has him out of reach for now. On October 1, 2010, a car crashed into the statue, knocking it from its pedestal and leaving a broken tail and one broken horn. This is not a piece for the living room. D’Ambrosi’s public work also includes The Fallen Warrior, a companion to Arizona’s Vietnam Veterans’ Memorial outside the state capital, and Buffalo Jone-Visionary, another life-size monument in Garden City, Kansas.
The ladder his sons finished
D’Ambrosi’s last project was a monument for the American Merchant Marine Veterans Memorial in San Pedro. The centerpiece, Jacob’s Ladder, shows two marines making a rescue at sea and climbing a ladder, and the whole installation rises about 23 feet. A 17.5-foot bronze sits on a five-foot concrete base, surrounded by a 16-foot pool with p.m. lighting. You can find it at John S. Gibson Park, 550 S. Harbor Blvd. What happened next depends on which account you read. Wikipedia describes a 20-foot-high sculpture and says he was about to begin the final clay model when he died on August 1, 1986, after a brief illness. The public art record notes he did not complete the final model, and it lists the work as 1985–1986 and also as 1986–1987. His sons Marc and Michael D’Ambrosi finished the model, casting, and installation in 1987. The memorial stands at the corner of South Harbor Boulevard and West Sixth Street, and the public art page gives the address as 550 S. Harbor Blvd. Neither source reconciles the timeline, but the bronze you see today carries the hands of two generations.
How the detail got into the metal
A common mistake is reading the gallery description that Jasper D’Ambrosi pioneered intricate Western bronze detail as if that kind of detail began with him. Bronze as a material was working hard long before that. Bronze is an alloy composed of copper, with smaller amounts of tin, zinc, and lead. American-made bronzes were first produced using the sand-casting method, in which a sculpture is made using a firm sand mold and assembled from separate pieces. The first known American wildlife bronze, Henry Kirke Brown’s Panther and Cubs from about 1850–55, was likely produced this way in collaboration with a former munitions foundry in Massachusetts. The lost-wax casting technique, imported from Europe and perfected in New York about 1900, changed what was possible: it relies on an intermediary wax model and a flexible gelatin mold, allows precise replication of textural detail, and lets the artist cast works in a single piece.
Light, the base, and a call to make
When you bring a bronze home, start by turning it so you can read the base. Look for the artist’s signature, the edition number, and the foundry mark, details that a Western Art Collector guide names as the key marks to check. On historical pieces, that foundry mark can be the difference between an original cast and a later one. Next, place the piece where good light falls across it. Strong light brings up the texture and lets the shadows the sculpture throws do their work, the same way you would light a painting to see it fully. If that takes a new fixture on the wall or ceiling, have an electrician handle the wiring. We would skip any care routine taken from a guide meant for outdoor plaques, the National Park Service Conserve O Gram on outdoor bronze states plainly that its procedures are not for sculptures or interior plaques. When the marks at the base are unclear, or when the question shifts from what you enjoy to what a piece is worth, stop and call a certified appraiser. That call, not a post, is what tells you what you really have.